$0.00
The PM-212-MTP-GE optical power meter is designed to measure absolute or relative optical power in optical networks terminated with multifiber MTP/MPO connectors. Because of use the large scale Ge photodiode the tester can measure overall optical power level from all fibers of MTP/MPO connectors in wide wavelength range.
There are two versions for simultaneous measurement:
The memory capacity allows storage and uploading of up to 100 measurements including memory position or fiber number, wavelength, absolute value or relative value and insertion loss. The SmartProtocol PC evaluation software supports memory download, test report generation and Data Exporter for data download to Excel sheet.
The rechargeable battery ensures long term working with a minimum service life of 2 years. Batteries can be charged via a USB port or external AC/DC adaptor. The controlled charging process ensures optimal battery status and extended operation time.
Features:
Standard accessories:
Options:
Note: 1) MTP patchcord on request, according to: CON_04-14_EN-MTP patchcord datasheet
Specifications:
| Parameter: | Note: | |
| Photodetector
active area |
Large scale Ge photodiode
19.6 mm2 |
|
| Working wavelength range | 800 – 1800 nm | |
| Dynamic range: | -40 dBm to +10 dBm | 800 – 1800 nm |
| Uncertainty | ± 5% | 1310, 1550 nm @ -20 dBm |
| Resolution | 0.01 | |
| Dimensions | 80 x 47 x 25 mm | including MTP/MPO adapter |
| Weight | Less than 90 g | |
| Temperature operating
storage Humidity (non condensing) |
-10 to +50 °C
-40 to +60 °C 0 – 95% |
|
| Battery working time | > 50 hrs | between battery charging |
| Battery life time | > 2 years | 980 mAh Li-Pol |
Compliant with RoHS-requirements (2002/95/EG, 27.01.2003)
Ordering code:
Multifiber single mode tester
| PM-212-MTP-GE | tester with Ge photodetector, MTP/MPO 12/24 fibers input interface |
| PM-212-MTP-GE-16 | tester 16/32 MTP/MPO connectors |
"*" indicates required fields
